MOKOSMART L02S-BCN
Reference for the MOKO SMART L02S-BCN Smart Beacon
Overview
The L02S-BCN is a Blecon-enabled Smart Beacon from MOKO Smart and distributed by Blecon. The L02S-BCN pairs a comprehensive set of sensors including: an accelerometer, temperature, humidity, barometric pressure, ambient light, and hall effect sensors with a nRF54L15 Bluetooth LE SoC.
Hardware
System Processor
Nordic Semiconductor nRF54L15
Dimensions
69.9 x 46.7 x 18mm
Φ45 x 18mm
Enclosure Material
PC (Polycarbonate)
IP Rating
IP67
Sensors
Temperature and Humidity
Barometric pressure
Accelerometer
Ambient light
Hall effect
Button
Single button inside enclosure
LEDs
1x Red, 1x Blue, 1x Green, externally visible. All PWM capable
Battery
CR2477 Lithium Coin Cell, 1000mAH capacity
External Flash
16Mbit NOR
Operating Temperature
-20°C to 60°C
Mounting Options
Double-sided adhesive, screw, zip-tie
Pre-Installed Firmware
The L02S-BCN comes pre-flashed with the Sensor Logger example application and is ready to connect to your Blecon Network.
Memfault Setup and OTA
You can perform an OTA update to change the firmware on the device.To connect L02S-BCN devices with Memfault, follow the instructions from our OTA getting started guide.
When building new versions of the firmware for OTA, the firmware needs to be configured with and uploaded to Memfault with the following scheme:
Software type
main
Hardware version
mkbnl02sn
Software version
major.minor.patch with optional pre-release and metadata suffixes.
Example:
3.3.2+sensor-default
Last updated